#Ikan beholder 3 manual#
#Ikan beholder 3 full#
#Ikan beholder 3 software#
#Ikan beholder 3 professional#

The manufacturer recommends you use prime and small zoom lenses with the EC1 gimbal. NOTE: Battery charger is not included with the EC1 gimbal. It comes with (3) 3.7V mAh detachable rechargeable Li-ion batteries. The battery-operated EC1 offers a battery operation time of up to 20 hours of standby time and approximately 8-10 hours operating time. There are also sound alert options for mode change and calibration adjustments. Use this as a quick reference while shooting or to select and change modes.Ī 4-way joystick interface and buttons allow user input. The back of the handle features a convenient OLED status display to provide you feedback on battery life and operating modes currently in use. The manufacturer mentions that the quick-release plate is compatible with an optional Manfrotto 577 Monopod. (1) 3/8-16 thread is provided on the bottom of the handheld grip to secure your EC1 gimbal to a tripod, jib or other support. These are ideally situated for your microphone or on-board monitor/recorder. Mount accessories using the (2) 1/4-20 mount points provided on the EC1.

#Ikan beholder 3 full#

3-Axis Follow Mode - full control of the gimbal, allowing you to Pan, Tilt, and Roll.

Pitch & Yaw-Axis Follow Mode - follows both Pan and Tilt movements.

Yaw-Axis Follow Mode - only follows your Pan movements.

The EC1 features 3 different follow modes. A 2.4g wireless joystick module can be used for remote control, but is not inluded with this purchase. NOTE: A Bluetooth module for remote control is not included. Be sure to check out any firmware upgrades by the manufacturer so you can unlock the latest sofware optimization. This will help you achieve high-angle or low-angle shots, boom moves, dolly shots, or a smooth and seamless transition from high to low during time-lapse photography.

It also supports remote control via wire or wireless connection.

Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes. Switch to Inverted Mode at any time by simply flipping the handle over the camera. After a few seconds, the camera will lock and hold its position until it is reset back to default. Quickly lock your camera into any position by manually pointing and holding it in any direction. In addition, it prevents motors from losing synchronization and skipping steps. The EC1 also increases the precision of stabilization by applying FOC-specific compensations. This version removes rotation blockers used in previous versions to prevent wire twisting. Slip ring technology allows your camera, while mounted on the EC1, to rotate 360° on all axes. Due to its redesigned quick-release baseplate system, the EC1 is easy to balance without the need of tools.

#Ikan beholder 3 manual#

Please be sure to follow the instructions in the product manual to balance your gimbal with the camera before use.

#Ikan beholder 3 software#

It does not require software changes in order to handle your specific camera.

Full Follow Mode - gimbal will follow, roll, pitch, and panīeholder EC1 is ready to use when you take it out of the box.

Follow Mode - camera follows the tilt and pan directions.

Pan-Follow Mode - gimbal follows pan and holds the tilt position.

This means that the camera's compensation will stay the same no mattery how you move the handle below it, the camera stays level with the horizon.

Lock Mode - camera will hold the direction and not follow, pan, or tilt.

You can toggle between these modes by simply pressing a key. This ikan EC1 Beholder uses a 32-bit electronic board system with several profiles for multiple shooting modes. It also features an adaptive PID-algorithm for preventing vibrations in wide angle shots and an ACC low-pass filter to improve stability as well.

#Ikan beholder 3 professional#

It will balance and smoother the picture your capture to achieve professional image stabilization. This 3-axis gimbal with 360° rotation on each axis helps you correct shaking or swaying.

The EC1 gimbal works well with fast-paced action sequences, aiming low or high-angle shots, or walking beside/behind/in front of your subject due to its rotating, brushless motors with a limitless range of motion. Some cameras you may already have which would fit this handheld gimbal, include: Sony a7SII, Panasonic GH4, Canon 5D Mark III, and many more. It is lightweight and easy-to-use, can be carried in your small camera bag or in the provided travel case. The ikan EC1 Beholder 3-Axis Handheld Gimbal Stabilizer with encoders is designed for use with DSLR or mirrorless cameras weighing under 4.5 lb.